Your request is being processed.

Malvern

$335.00
In Stock
Order Now. Ships in 3-5 Weeks.
GOES GREAT WITH
YOU MIGHT ALSO LIKE
Reviews ASK AND ANSWER

Size & Fit Guide

Sizing Tips
Interactive Fit Guide
Conversion Charts

How To Measure Your Feet For The Best Fit

Allen Edmonds creates shoes with the highest standards of craftsmanship and style to give you the best experience possible.

Our commitment to excellence starts with ensuring you have the right shoes for your personal needs and sizing. With more and more customers preferring the convenience of online shopping, we've developed easy-to-use tools to help ensure you take accurate measurements and get the proper fit with your shoes. To get a truly professional fitting, we recommend visiting an Allen Edmonds Master Fitter at any one of our retail stores. However, if an Allen Edmonds store is not located near you, this Shoe Fit Guide is designed to help ensure your Allen Edmonds shoes are the best possible fit.

Helpful Tools

Tip #1: Measure At A Time That Fits
Feet tend to swell in different circumstances and at different times of the day. We suggest you measure your feet during the midday or late afternoon after you have been on your feet for some time.

Tip #2: Wear Socks When Measuring
Wear the type of socks that you'll likely be wearing with your new shoes, as the thickness of the socks may affect your measurements.

Tip #3: Stand Straight and Balanced
When you do the measuring, be sure both feet are on the ground and you're balanced and straight to get the proper foot placement.

Tip #4: Get Someone To Help You
You need to have a friend help you take the measurements because if you were to try to take your measurements yourself, when bending down to mark your length and width, your sizing would be affected. Make sure your friend takes your measurements looking straight down at the Shoe Fit Guide. Even viewing it at a slight angle may affect the outcome.

Tip #5: Give Yourself A Bit of Room
If your measurement is on a length line, we recommend you go to the next half-size longer in order to give your toes a bit of room.

Tip #6: One Foot Larger Is Common
Almost everyone has one foot larger than the other. The key is to determine your size from the measurement of the larger of your two feet. And obviously, be sure to measure both feet.

Conversion Chart

U.S. E.U. U.K.
6 39 5.5
6.5 39.5 6
7 40 6.5
7.5 41 7
8 41.5 7.5
8.5 42 8
9 43 8.5
9.5 43.5 9
10 44 9.5
10.5 44.5 10
11 45 10.5
11.5 45.5 11
12 46 11.5
12.5 47 12
13 48 12.5
14 49 13
15 50 14

Size & Widths

Width Available Sizes
AAA 10-12, 13, 14 Narrow
AA 10-12, 13, 14
A 9-12, 13, 14
B 8-12, 13, 14, 15
C 1.8-12, 13, 14, 15
D 6-13, 14, 15, 16 Medium
E 6-12, 13, 14
EE 6-12, 13
EEE 7-12, 13, 14 Wide

Need Help?

Live Chat

Interactive Fit Guide

Download our Shoe Fit Guide (PDF)

Locate a Retail Store

Printable Fit Guide

In order to help you get an accurate fit we've developed a printable Fit Guide.

Download Fit Guide
MATCHING SHOE CARE ACCESSORIES
Malvern
Malvern will be added to your bag.
Consider adding these matching shoe accessories:
Quantity
Item
Description
Availability*
Unit Price
Full-Toe Cedar Shoe Trees by Allen Edmonds
Full-Toe Cedar Shoe Trees by Allen Edmonds
SKU SF604
Size
In Stock
Order Now. Ships in 3-5 Weeks.
$24.95
Premium Shoe Polish by Allen Edmonds
Premium Shoe Polish by Allen Edmonds
SKU SF549
Color
In Stock
Order Now. Ships in 3-5 Weeks.
$9.00
Overview Details Shoe Care Construction Recraftable

Malvern - Men's Plain-toe Lace-up Chukka Boots by Allen Edmonds

Everything changes with the seasons. When the leaves start to fall from the trees thoughts turn from the diamond to the gridiron, twill chinos are shelved in favor cords and jeans, and even your go-to woven loafers need to take a rest. But don't worry because these three-eyelet blucher-style chukka boots are a more than worthy successor to your favorite summer footwear. Based on a classic work shoe designed to withstand the rigors of early 20th century office life, the thick leather sole makes these a must have as the weather changes from warm and sunny to cool and soggy. Built on the 1-Last for a great fit and rounded, fuller toe these ankle-high boots will feel and look great whether you are wearing them to a casual work environment or your son's football game. Don't blame us if they also end up replacing your winter boots as well.

Click any link below to view similar styles:

Allen Edmonds Custom Shoes

  • Many of our shoe styles can be ordered in mis-matched and special sizes for a nominal charge through our Consumer Assistance Center at 1-800-235-2348.

Allen Edmonds Shoe Care

  • Three-eyelet blucher

  • Chukka style boot

  • Full leather linings

  • Regular welt

  • Rubber sole and toplift

  • Welted Last-1 (511)

CARING FOR BURNISHED CALFSKIN
To remove the slight haze you may notice with a new pair of burnished calfskin shoes, wipe them with a soft cloth or brush with a horsehair shine brush. Clean regularly with a damp cloth and allow them to air dry. Then apply a medium coat of Allen Edmonds Premium Polish in the appropriate color and allow to air dry. Brush with a horsehair shine brush to remove excess polish and buff using a cotton flannel cloth.

SUEDE AND NUBUCK LEATHERS
For everyday care, use the Allen Edmonds Suede Combo Brush for spot-treating and detailing. For maximum water protection, apply Allen Edmonds Suede & Nubuck Protector before your first wearing.
View our Classic Collection

Our 360° Goodyear welted footwear is characterized by its durability, comfort and fit. The manufacturing process consists of over 200 steps. The process begins with the cutting of the leather. Patterned dies are used, and pieces are cut based on the style. Skilled handsewers then stitch the vamps, plugs, foxes and quarters together to form the uppers. Next, each last is selected according to the style and size. The insole is attached to the bottom of the last. Then, the upper is pulled over the last with great care to make certain that seams are straight. The 360° welt is stitched around the perimeter of the outsole, eliminating the need for the rigid metal shank that is found in most other shoe brands. A heated cork layer between the insole and outsole allows each foot to form its own uniquely shaped print for true custom comfort. Finally, finishing touches are applied, and shoes are inspected to ensure perfection before being packaged.
This Style is recraftable

This style is recraftable®.

Allen Edmonds 360° welted shoes are so well-made that we can actually return them to their original glory with our exclusive Recrafting process. Using the original manufacturing process, we literally rebuild worn footwear from the bottom up.

When you send your shoes in for Recrafting, our experts will first free the uppers from worn soles. Stretched over the proper last, the original uppers become shoes again through our unique manufacturing process. After your shoes are re-welted, re-corked, soled and heeled, old finishes are carefully removed from the leather and new polishes and waxes applied. In about four weeks, shoes that look surprisingly new are returned to you.

Click here to learn more about Recrafting